All cars will be thoroughly washed and decontaminated before any stage of machining. Once this has been carried out, we will then apply a panel wipe down ready for coating of your choice. Choose size and condition of car.
Small car i.e. VW Polo. Fiat 500
Medium car i.e. VW golf. Audi A3
Large car i.e. BMW 5 series. Audi A6
4×4 i.e. Range Rover sport. Mercedes ML
One-stage Machine polish with Rupes ultrafine gel. Recommended for new cars with near perfect paint work.
Small £200
Medium £210
Large £220
4×4 £230
Two-stage machine polish with Rupes Keramik fine gloss plus Diamond ultrafine gel. Recommended for new/nearly new cars with fine blemishes from poor washing.
Small £300
Medium £310
Large £320
4×4 £330
Three-stage machine polish with Rupes Quarts gloss medium, Keramik gloss fine and Diamond Ultra fine gel. Recommended on 1 to 4 years old cars with light scratches and swirls and water spotting.
Small £380
Medium £390
Large £400
4×4 £410
Four-stage machine polish with Rupes Zephir high grade gel compound, Rupes Quarz gloss medium, Keramik gloss Fine and Diamond Ultra fine. Recommended for deep scratches on all panels. Please note some scratches can be judged too big to remove.
Small £460
Medium £470
Large £480
4×4 £490
The prices shown above include a coating of Labocosmetica #CUPIDO on all paintwork or you can go for any of the upgrades plus add on’s of your choice at a extra cost.
#CUPIDO (durability 4-6 months)
#CUPIDO creates deep gloss and provides an excellent antistatic, self cleaning ability.
#SAM + #HPC (durability 4 years)
#SAM will form a stable chemical bond and thus obtain the best possible performance in terms of effectiveness and durability.
#HPC paves the way to a whole new category of coatings dedicated to the overcoat. Thanks to its “nano hydro-gel system” technology, it creates a hydrophobic membrane with a polymeric matrix made up of “building blocks”, which form lattices and adhere directly to the surface at room temperature, creating a highly resistant and elastic layer.
+£180 for 2 layer
#STC + #HPC (durability 6 years)
#STC Permanent nano coat, guarantees perfect adhesion to the surface and a more effective protective shield, its currently the most innovative coating solution thanks to its self-cleaning ability and resistance to chemicals.The chemical physical blend uniquely combines the hardness and flexibility of the glass layer, provides a highly reflective vitreous gloss that lasts throughout the life cycle of the treatment.
#HPC paves the way to a whole new category of coatings dedicated to the overcoat. Thanks to its “nano hydro-gel system” technology, it creates a hydrophobic membrane with a polymeric matrix made up of “building blocks”, which form lattices and adhere directly to the surface at room temperature, creating a highly resistant and elastic layer.
+£200 for 2 layer
#BLINDO + #HPC (durability 5 years)
#BLINDO is a new coating concept: it creates an ultra-fine, transparent layer that increases the hydrophobic properties of the surface and is more resistant to the adhesion of salt deposits (limestone) and to the action of corrosive agents (rain, salts, detergents, etc.). It also has greater chemical stability for improved durability over time.
#HPC paves the way to a whole new category of coatings dedicated to the overcoat. Thanks to its “nano hydro-gel system” technology, it creates a hydrophobic membrane with a polymeric matrix made up of “building blocks”, which form lattices and adhere directly to the surface at room temperature, creating a highly resistant and elastic layer.
+£250 for 2 layer